GTEK Flotation Cell
Description
Flotation machine, which is also called flotation separator, can be used to achieve specific separations from complex ores such as lead-zinc, copper-zinc, etc. Initially developed to treat the sulphides of copper, lead, and zinc, the field of flotation has now expanded to include the oxidized minerals, non-metallic ores and fine coal. Flotation machine can forms different bank to be applied for rouging, scavenging and cleaning concentration.
Working Principle
The motor drives the impeller through V-belt, which produce centrifugal effect to form negative pressure, on one hand, sufficient air is inhaled to be mixed with slurry, on the other hand, slurry and chemical reagent are mixed, at the meantime, the bubbles are micronized and make the mineral particles easier to stick on the bubbles. The mineral is then usually transferred to the froth, or float fraction, and then scraped by the scraper, leaving the gangue in the pulp or tailing.
XJK(A) Flotation Cell
Technical Specification
Specification of XJK(A) Flotation Cell
| Model |
Volume
(m3) |
Impeller
Diameter
(mm) |
Capacity
(m3/min) |
Impeller
Speed
(r/min) |
Moter
Power
(kW) |
Dimensions
(LxWxH)(mm) |
| XJK-1A |
0.13 |
200 |
0.05-0.16 |
593 |
1.5 |
2195x1080x1074 |
| XJK-2A |
0.23 |
250 |
0.12-0.28 |
504 |
1.5 |
2680x1190x1283 |
| XJK-3A |
0.35 |
300 |
0.15-0.5 |
500 |
1.5 |
1028x1327x1285 |
| XJK-4A |
0.62 |
350 |
0.3-0.9 |
400 |
3 |
3936x1740x1831 |
| XJK-5A |
1.1 |
500 |
0.6-1.6 |
330 |
5.5 |
1100x1100x1100 |
| XJK-6A |
2.8 |
600 |
1.5-3.5 |
280 |
11 |
1750x1600x1100 |
SF Flotation Cell
Features
1. Large suction capacity, lower power consumption;
2. Each cell have the capacity to suck air and slurry automatically;
3. Lower rotational speed of impeller, long service time;
4. Slurry in flotation cell cycled up and down in fixed way, which is favorable to the suspension of coarse particles.
Technical Specification
Specification of SF Flotation Cell
| Model |
Volume
(m3) |
Impeller
Diameter
(mm) |
Capacity
(m3/min) |
Impeller
Speed
(r/min) |
Motor
Power
(kW) |
Dimensions
(LxWxH)(mm) |
| SF-0.37 |
0.37 |
300 |
0.2-0.4 |
352 |
0.55 |
700x700x750 |
| SF-0.7 |
0.7 |
350 |
0.3-0.9 |
400 |
1.1 |
920x820x950 |
| SF-1.2 |
1.2 |
450 |
0.6-1.2 |
312 |
1.5 |
1100x1100x1100 |
| SF-2.8 |
2.8 |
550 |
1.5-3.5 |
268 |
1.5 |
1700x1600x1150 |
| SF-4 |
4 |
650 |
2.0-4.0 |
238 |
1.5 |
1850x2050x1200 |
BS-K Flotation Cell
Features
1. Easy installation, adjustment and maintenance
2. Simple Structure of impeller, easy to manufacture and strong mixing power
3. Does not require froth peddle, it can ensure the grade of concentrate. In thin foamy layer, it can use froth peddle, it is equipped with froth peddle
4. Adopt U-type chute
5. Low power consumption and reliable operation
Technical Specification
Specification of BS-K Flotation Cell
| Model |
Volume
(m3) |
Capacity
(m3/min) |
Rotor
Speed
(r/min) |
Motor
Power
(kW) |
Inner Dimensions
(LxWxH)(mm) |
Weight of
Single Cell(kg) |
| BS-K2.8 |
2.8 |
0.4-3.0 |
248 |
5.5 |
1550x1550x1350 |
1740 |
| BS-K4 |
4 |
0.5-4.0 |
210 |
7.5 |
1850x1850x1550 |
2568 |
| BS-K8 |
8 |
1.0-8.0 |
180 |
15 |
2350x2350x1950 |
3100 |